top of page
INDOOR REMOTE RADIATION SENSING AND MAPPING
Fast & Accurate Radiation Surveying without Human Exposure
When operating a nuclear station, understanding where and to what extent radiation is present is a daily preoccupation. Elios 2 RAD offers indoor remote radiation sensing that allows you to safely measure and map nuclear radiation anywhere inside your nuclear station from a non-contaminated zone.
Have You Put Everything Possible in Place to Reduce Your Staff’s Exposure to Radiation?
Any dose, however small, should be avoided.
Send robots in before you send people.
Get a Clear Picture of Ongoing Radiation While Keeping Your Workers Out of Harm’s Way
IDENTIFY AND LOCATE RADIATION LEAKAGE
ESTIMATE TOTAL DOSE AND RADIATION RATE ON A TASK
REACH HIGHER SAFETY STANDARDS
Quickly deploy Elios 2 RAD from a non-contaminated area to evaluate risks and dangers in case of a leakage or incident.
When planning interventions estimate the total dose workers would be exposed to, and identify hot-spots to minimize human exposure.
Evaluate how much exposure was avoided after an intervention and over time by leveraging Elios 2 RAD’s cumulative radiation measurement.
A Safe and Healthy Work Environment for Your Staff Is Our Number One Priority
A SOLUTION PRAISED BY THE MAJOR PLAYERS OF THE NUCLEAR INDUSTRY
65% of US nuclear reactors equipped with Flyability technology
Up to 6-digit savings in a single flight achieved repeatedly
Successfully Tested up to 800 R/H
All the Benefits of Elios 2
With Remote Radiation Sensing Capabilities on Top
Sensor technology : Energy compensated Geiger-Muller detector
Sensitivity : 2.6 cps/uSv/h
Spectrometry : No
Dose rate range : 1uSv/h - 10Sv/h 100uRem/h - 1000Rem/h
Type of radiation : Gamma, xrays
Energy range : 15keV - 8MeV
Response frequency : 2s
Data : In-flight dose reading through piloting app Post-flight dose reading and localization
Configurable units : Sv or Rem
Calibration : Detachable sensor with 100cm long cable to fit in Shepherd source for calibration.
In-flight Dose and Dose Rate Reading / Sensor Management
The dose and dose rate are displayed as a live measurement on the piloting application with a sampling rate of 2 seconds. An histogram from the last minute of measurement is also available with an indication of the maximum threshold.
Select between Rem and Sv unit, get the instantaneous reading of the sensor, cumulative dose for the flight, and lifetime cumulative dose.
Localize and Map Your Radiation Data in a Single Click Using Inspector 3.0
Post-Flight Dose Reading
Replay your flight with the dose and dose rate measurement displayed synchronously along and on top of the video.
Radiation Localization and Mapping
Plot in a 3D map the trajectory of the UAV with a colorization tied to the dose rate measurement. Overlaying the trajectory gives you the local radiation reading.
Examples of Project Outcomes
Requires to build a photogrammetric model with a 3rd party software which is not included with Elios 2 RAD.
Calibration
The ability to calibrate a dosimeter is essential to collecting actionable data. To calibrate the sensor, connect the sensor to your computer using a USB cable and insert the sensor into the calibration unit. The software displays the dose reading from the dosimeter and this reading can be edited to the appropriate dose to calibrate the sensor.
Drone Contents
Airsens Academy provides professional training on drone thermal imaging systems and methods of diagnosis.
"Thank you very much for your interest.
We will continue to reward you with the best service. ”
bottom of page